Shower Constantly Running? The Causes And Solutions To The Problem

When water is still coming out of your shower head after you have switched the shower off entirely, there could be a variety of reasons for this. It’s important to remember that your plumbing is built up of various gaskets, valves and seals.

Causes: Water Coming Out Of The Shower Head

Faucets like the one found in your shower have a tiny screw within the handle that keeps them in their intended place. In order for the faucet to turn the water on and off and prevent any leaks, the screw must be tight.

The Faucet Is Loose

A cartridge or valve in your shower is there to regulate both the temperature and the flow of water as you turn the shower handle. These two terms are used interchangeably, so don’t worry about having two damaged components.

The Cartridge Or Valve Is Faulty

A less likely reason for water continuously pouring out of your shower head is because of excessive condensation. This is usually caused by hot water reacting with cold bathtubs and then the moisture and humidity is not being allowed to escape.

Excessive Condensation

Depending on what your cause is, the solution might change. Generally speaking if you have a loose faucet, you can simply tighten it at home and this should solve your problem. However, if you have a faulty valve or faulty cartridge, you will need to replace it.

Solutions: Water Coming Out Of Shower Head

If you discover that the problem is down to a loose faucet, all you will need to do is tighten it.

Tighten The Faucet

As applicable, you might notice that you need to replace the valve or cartridge. Once again, you will need to switch the water off at the mains supply and gain access underneath the cover plate, so you’ll need to use a flat-head screwdriver.

Replace The Valve Or Cartridge

Shower Constantly Running? The Causes And Solutions To The Problem